Rolling Head

• A head that moves. The upper body is flexible, so the top of the CUP twists, rolls and tilts while you use it.
• 360 degrees at the tip. The movement concentrates around the tip of the shaft, from any angle you choose.
• Vacuum valve. Cover the air hole while stroking and the CUP builds suction; lift your finger and it releases.
• Smooth Pad entry. The entry pad seals as you insert and spreads the lotion inside on its own, so nothing needs adding.

A head that moves with you

The flexible section above the grip lets you roll the head around, work it back and forth, or tilt it side to side. The sensation changes with the motion rather than staying fixed, which is the point of this one.

Where it sits in the range

TENGA rate it evenly across squeeze, vacuum and squish, with stimulation a step higher. It is one of the larger CUPs in the range.

Suction you control with a fingertip

There is an air hole in the base under a sticker. Peel it off before use, leave it open while inserting, then cover it with a finger during use to build suction.

The entry pad handles the lotion

Every TENGA CUP uses the Smooth Pad at the opening. It seals as you insert, keeps the lotion where it should be, and applies it as you go.

1. Remove the wrapping from the base of the CUP and peel off the sticker covering the air hole.
2. Take the cap off. The lotion is already inside, so nothing needs to be added.
3. Insert with the air hole open, then cover it with a finger during use to build suction.
4. Twist and roll the top of the CUP as you go. Changing the motion changes the sensation.
5. When you have finished, put the cap back on.

CUP products are single use. There is nothing to wash and nothing to store.

Put the cap back on when you are done and dispose of the CUP with your household waste. Before use, keep it out of direct sunlight and away from heat.