Flip Zero Electronic Vibrotation
Add spiraling sensations to TENGA’s high-end product range, the TENGA FLIP ZERO Series!
An internal gyroscopic sensor lets you manipulate rotational stimulation by simply tilting the item.
The dual motor vibrations combine perfectly with the new internal details, made exclusively for spinning vibration!
Flip Zero Electronic Vibrotation
฿11,900
SKU: TNG-FLPZE-VIB
Details
The latest in pleasure innovations have culminated in the strongest FLIP ZERO yet. Take the next step beyond the known boundaries of pleasure.
Flip Zero Electronic Vibrotation Features
Add spiraling sensations to the TENGA FLIP ZERO Series!
An internal gyroscopic sensor lets you manipulate the rotation by simply tilting the item!
ROLLING HELIX ENGINE
The powerful vibration at the deepest area provides stimulating tremors at the tip. Each deep thrust creates intense vibrating pleasure.
ROLLING DRIVE ENGINE
Powerful vibration at the center creates stimulation that resonates throughout the entire body. With rolling and stroking, enjoy rotating, vibrating sensations taking you beyond the limits of pleasure.
Features
- Rotation you steer. A gyro sensor reads how you tilt the unit and turns that into the direction and the speed of the rotation.
- Two vibrating motors. Two levels and three patterns, usable at the same time as the rotation.
- Pressure pads, and a case that flips fully open. Squeeze for vacuum, open it flat to wash. Charges over USB-C.
How to Use
- Slide the arms off the sleeve, then press the clasps on both sides to unlock and open it.
- Apply the lotion along the inside, close it, and put a little more at the entry point.
- Peel off the foam sticker and seat the sleeve into the control unit.
- Hold the vibration button for two seconds to start it, and press again to move through the patterns.
- Hold the rolling button for two seconds to start the rotation. Tilt the unit to steer it, and press again to change the speed.
Product Care
- Slide the arms off and press the clasps to unlock and open the case. Do not force it.
- Rinse the inside of the sleeve under running cold or lukewarm water. Never use hot water.
- Press gently to work the water out. Do not wring or stretch the sleeve.
- Lay the slide arms flat and stand the part-opened FLIP in the slots to dry, out of direct sunlight.
- Put it away once it is completely dry.
Dry it completely before storing. Moisture left inside is the main reason a sleeve wears out early.
Charge it with the supplied USB-C cable in its charging base. Roughly 90 minutes of charging gives about 40 minutes of use.
Specifications
| Size | 302 x 87 x 85 mm |
|---|---|
| Weight | 890 g |
| Insertion length | 140 mm |
| Insertion width | 40 mm |
| Materials | PC, ABS, POM, elastomer, silicone |
| Use | Reusable, washable |
| Vibration | 2 levels and 3 patterns |
| Rotation | Gyro sensor, tilt to steer |
| Battery | Li-polymer, USB-C, about 90 min charge for 40 min of use |
Customer Reviews
No reviews yet. Be the first to review this product.
